Safety DayLights® - Be safe, be seen Safety DayLights® - Be safe, be seen Safety DayLights® - Be safe, be seen

About Safety DayLights™

Failing to see another road user in time (or at all) is a contributing factor in over 50% of all daytime accidents. For daytime intersection accidents this increases to as much as 80%.

Source: The Safety Effects of Daytime Running Lights, SWOV, 1997

Why Install HELLA LED Safety DayLights?

HELLA Safety DayLightsare designed to enhance the visibility of your vehicle to other road users during daylight hours. Dipped beam headlamps on the other hand, are designed to effectively light up the road in front of the vehicle during darkness, whilst causing as little glare as possible to oncoming traffic.

Hence during daytime, dipped beam headlamps 'waste' most of their light directed to the road in front of the vehicle but provide very little as a signal to the driver of an oncoming vehicle in bright daylight.

Dipped Beam Headlamps

Low Beam HeadlampsDesigned to light the road at night without causing glare to other road users.

HELLA LED Safety DayLights

HELLA LED Safety DayLights™Designed to increase the visibility (conspicuity) of your vehicle during daylight hours.

HELLA LED Safety DayLights

Be Safe Be Seen

Safety DayLights are forward facing Signal Lamps that enhance the visibility of your vehicle during daylight hours to prevent vehicle crashes by ‘accidental oversight’.

As road users we have all experienced the ‘fright second’ of an almost crash, being almost overlooked by another car, van or truck, or equally frightening almost not noticing another vehicle approaching due to an inconspicuous vehicle colour, or the setting sun casting harsh shadows momentarily obscuring the approaching vehicle.

Any single one of these ‘fright seconds’ has the potential to end in a tragic outcome and an increase in the road toll statistics.

HELLA LED Safety DayLights™
HELLA LED Safety DayLights
Low Beam Headlamps
Dipped Beam Headlamps

HELLA LED Safety DayLights are:

A “never forget” safety enhancement. They automatically switch ON when the ignition is switched ON and will automatically switch OFF when the headlamps or park lights are turned on.

Use 95% less energy than your dipped beam headlamps, saving as much as 0.2 litres of fuel per 100km.

Using headlamps during the day will increase your fuel consumption and will result in your valuable headlamp bulbs requiring more frequent costly replacements.

Designed as a one off “Fit and Forget” solution using the highest quality LEDs and materials. HELLA innovative solutions have been incorporated into millions of lamps, engineered and tested to the most stringent standards, to suit the most demanding environmental conditions.

This ultra durable lamp can also extend the life of your headlamps by reducing their use during the day.


Maximise your Vehicle Visibility

HELLA LED Safety DayLights™ are specifically designed to make your vehicle conspicuous to other road users, dipped beam headlamps on the other hand are designed to effectively light up the road in front of the vehicle during darkness, whilst causing as little glare as possible to oncoming traffic.


HELLA LED Technology

HELLA's range of world leading LED lighting is expertly designed and precision manufactured for optimum visibility and safety.

Fit & Forget by Design

Fit and Forget by Design means every aspect, material and component of this lamp has been carefully chosen to ensure longevity in the most demanding environmental conditions.

RFCommSafe<sup>TM</sup>

RFCommSafe™ products were developed in recognition that some radio communication equipment can be very sensitive in remote areas. RFCommSafe™ products are designed to ensure no interference with any other electronic equipment.

Ultra Long Life

Ultra long service life HELLA LED technology has no filaments to break, thus making the LED lamps extremely shock and vibration resistant for reliable illumination and safety.

Multivolt<sup>TM</sup>

LED Multivolt ensures a uniform level of intensity and full light output at any voltage from 9 to 33 volts.

5 Year Warranty

This LED based lighting product carries a 5-year warranty from end user purchase covering faults in materials, components or workmanship.

ADR Compliance

Product is compliant to all relevant Australian Design Rules to allow use on Australian and New Zealand roads.

ECE Certified

Product has been type approved to all relevant UN ECE Regulations to allow use on Australian and New Zealand roads.

Grilamid Lens

Grilamid® is a high performance polyamide manufactured in Switzerland. The revolutionary transparent plastic offers an unbeatable combination of exceptionally high impact strength and resistance to long-term UV-exposure and chemical damage. 

UV Resistant

Product is designed to withstand harsh environmental conditions and to tolerate long term exposure to high UV levels without fading or embrittlement.

Made in New Zealand

This product was designed and manufactured in New Zealand by the same team that in 1998 first pioneered a no compromise approach to durable LED product design.

 
VIEW OUR PRODUCT RANGE ›